interior trim, door panel, sunshade panel, seat side

interior trim, door panel, sunshade panel, seat side

Contact us

cooperationlike@gmail.com

The sunshade of the canopy is made of high impact resistance polycarbonate material, and its strength is about 200 times that of glass. Raw materials are imported from Germany and processed at home. The use of double-sided co-extrusion technology to add anti-ultraviolet materials can effectively shield more than 98% of ultraviolet rays, protect automobile top paint, and more effectively control continuous heating. At the same time, it also has flame retardant effect and can be used for more than 30 years in the environment of-30-60 ℃ (thermal deformation occurs at 137 ℃). The rain shed falling pipe is made of high-strength aluminum alloy with a unique and user-friendly design to avoid secondary pollution to you when the ceiling water falls to the ground. The utility model has the advantages of reasonable structure, easy cleaning and convenient removal of dirt in the pipeline.

Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Kaifeng glass greenhouse requires the cooperation of a variety of equipment, with higher and higher temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about the construction of Kaifeng glass greenhouse, please contact Minghao greenhouse Engineering Construction Company directly.

Double-layer glass can achieve the same area in terms of heat preservation and thermal insulation, the temperature of the building is uniform and asymmetrical, and there is no problem with the thermal insulation performance of all-glass. The outdoor frame of the solar roof works under all-glass sunshade, so it is divided into electric glass and machine glass to prevent rain leakage in rainy days.

interior trim, door panel, sunshade panel, seat side

Take camping, for example, how many things you need to carry if you want to hold a high-standard camping, which will probably surprise you. Professional tents that can easily take off for 2,000 yuan, Kermit chairs for thousands of yuan, and tables as small as egg rolls are all the most basic things. They also need picnic mats, sleeping bags, folding cars, sunshades, bright lights, waterproof backpacks, lighting, and even espresso machines and appliances-and large solar charging panels that provide them with electricity.

Internal thermal insulation system when the greenhouse or indoor temperature drops to the set low temperature limit at night, turn off the thermal insulation quilt, strengthen the heat preservation of the greenhouse, design and construction of the solar greenhouse greenhouse, reduce the ground radiation heat loss, reduce the heating energy consumption, and the design and construction of the ecological restaurant, greatly reduce the operating cost of the greenhouse; in the daytime, the shade curtain can be opened, and the design and construction of the multi-span greenhouse greenhouse can make the greenhouse fully daylighting. The working principle is the same as that of internal sunshade, which is made of a lightweight quilt that does not absorb water and weighs between 100 and 150 grams.

As can be seen from the above picture, through horizontal shading, a certain direct area can be reduced on the outer window, which makes the radiation heat to the building caused by the heat of the outer window (red wave arrow part). At the same time, through the upper reflective surface of the sunshade, the sunlight is reflected to the ceiling of the building, and then through the diffuse reflection of the ceiling, the daylighting inside the building is increased (orange wave arrow part). It should be noted that this part of the reflected light also brings part of the energy into the room, which will cause indoor load, but the heat of reflected radiation can be reduced by using selective reflection coating, therefore, the heat caused by this part of solar reflected radiation can be considered to be much less than that caused by direct sunlight.

interior trim, door panel, sunshade panel, seat side

Among them, Lijin FA two-plate high-performance large injection molding machine adopts a unique two-plate clamping structure and an optimal combination design that integrates mechanical, hydraulic and control. The maximum clamping force can reach 70000KN. Its efficient and stable control system is more suitable for auto parts molding and lightweight requirements, with high-quality servo pump group, minimizing production energy consumption. It is suitable for the intelligent production demand of large-scale deep cavity products, and the models in the auto parts industry are concentrated in 450-4500 tons. It is mainly used to produce automobile bonnet, front and rear bumper, exterior decoration electroplated parts, front grille, dashboard, interior trim, door panel, sunshade panel, seat side cover and other parts, equipped with professional injection molding machine controller, single cylinder injection system, high repetition precision, large modulus and opening stroke, high quality hydraulic sealing technology. Improve the durability and reliability of the machine.

Sunshade cosmetic mirrors are already common in models at this price, but the lighting function is intimate. The floor accelerator pedal is also different from the conventional model, which helps the driver to control the vehicle more accurately. Although external audio is popular nowadays, Mazda 3 Onksera not only supports MP3 and WMA playback, but also provides a single disc CD function, which can be called a “welfare” for nostalgic consumers. The control panel behind the block is used to set all the information in the central control screen, and the functions such as multimedia, navigation and system favorites are designed with independent buttons, which is worthy of recognition.

Car front sunshade board the car sunshade board can be put outside as long as the front block, because the sunscreen is installed in the car, the sun will shine through the glass into the car, and the aluminum foil will be reflected back to the car by the glass after reflecting sunlight. The sunshade insulation layer absorbs part of the heat, but blocks the heat in the car and heats up the air in the car, which only plays the role of light insulation and non-thermal insulation.

interior trim, door panel, sunshade panel, seat side

The interior design mainly includes dashboard, steering wheel, seat, seat belt, airbag, carpet, sidewall interior decoration, sunshade panel, handrail, car rearview mirror and so on. The main design of exterior parts includes front and rear bumper, glass, door anti-collision decoration strip, intake grille, luggage rack, skylight, rearview mirror and so on. Each company may divide these parts into different departments.