In the field of body accessories, the project applications of “automobile anti-clamping system”, “performance technical requirements and test methods of automobile seat belt ribbon”, “passenger car door interior trim panel assembly”, “passenger car dashboard assembly and auxiliary dashboard assembly” have been put forward, and the standards such as “automobile back door electric opening and closing system”, “automobile ordinary air spring” and “automobile sunshade panel” have been updated.
First, the applicable extension width is 3, which uses a mechanical device and a crank arm device system. Under the action of spring, it can also be used for ceiling installation, light steel keel and other hard wall installation, brick wall motor control, the following is the awning fabric introduction. 00 meters, manual crank control through different transmission systems. The whole crank arm group is realized by an arm block, which can be adjusted in parallel with any precision of ~ 70 degrees. The characteristic of the 00-meter, half-box curved arm awning is that the sunshade fabric can be incorporated into the hood. Bolts and screws are made of high-quality stainless steel, applicable length is 6, can be applied to concrete, produce telescopic tension, infrared remote control and wind and rain sensor control, the structural frame adopts degree space aluminum. Wood. The common glass with good shading performance is endothermic glass, heat reflection glass, low radiation glass.
As a hot automotive supplies, the material of the sunshade is composed of seven layers of materials, wear-resistant and heat-proof, anti-ultraviolet up to 99%, and the optimized material thermal insulation is also increased by 99%. It is found that the heat insulation of the optimized material can be directly reduced by 20 degrees before and after use. such a powerful ability is undoubtedly an indispensable good thing for cars.
Moreover, the hot weather will cause damage not only to the paint surface, but also to the car interior and dashboard. Therefore, car owners are advised to install sunshade curtains on their cars in summer. Has a very good thermal insulation effect, effectively isolate the sun, ultraviolet rays, but also can block the light and protect privacy.
Architects attach great importance to the physical environment of academic buildings. The whole building is almost completely wrapped in glass curtain walls, ensuring transparency and interactive experience, while introducing daylight for daily work and research, and the space that does not need daylight is located in the middle of the building, reasonable functional distribution and effective use of natural light reduces the energy consumption caused by artificial light sources. Architects deal with the building shell in an ingenious and innovative way, using double-layer low-iron toughened glass and mechanical sunshades with a total thickness of 41 cm for mechanical ventilation to isolate subway noise and create a quiet learning environment. at the same time, a thermal buffer zone outside the building is formed, which further improves the comfort of the internal environment.
The earliest sunshade is operated from the car, the advantage is relatively convenient, will not be lost. The disadvantage is that the effect is too poor. Because it can not completely protect the center console, there will always be light leakage. And the central console of the car is not just a part of the car, it extends all the way to the engine compartment. From the outside of the car, the part under the windshield to the middle of the engine cover is actually the same as the central console, which can not be covered. The temperature of the central console will never come down.
Spray-free plastic injection molded parts can meet the requirements of matte, highlight or flashing pearlescent and other car companies. The spray painting process is eliminated, the production of VOCs is controlled from the source, the damage to the environment is reduced, and the manufacturing cost is reduced. Poly Sailong spray-free plastic has been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field.
First-class package configuration: body color door handle, front door accent lighting, full-length advanced upgrade floor console, heating steering wheel, internal auxiliary handle, IPLED environment light tube, leather trimmed barrel seat, 4-way headrest, bucket seat, front heating seat, front seat backrest map pocket, electric four-way drive waist adjustment, electric four-way passenger waist adjustment, rear 60tap 40 split folding bench, luxury front door trim panel, Mopar Carton lighting, electric 8-way driver / passenger seat, power adjustable pedal, advanced package dashboard, rain sensitive windscreen wiper, rear door accent lighting, rear seat compartment storage space, rear window defroster, sunshade with illuminated cosmetic mirror, general garage door opener with 12-inch display
Lining materials for skates and sports shoes, such as automobiles, air conditioners, refrigerators, freezers, household appliances, engineering cooling, refrigeration and freezing, movable insoles, backpads of luggage, surfboards Kneel mat high-grade foam tape sold base materials such as ice storage, cold-proof buildings, light roofs, construction installation and demolition, etc., car seats, car interior decoration, roof, foot pads, sunshade materials, electrical appliances, fine instruments, instruments and other electronic goods sold shockproof buffer package dismantling and other common categories. Automotive electronic accessories, air conditioning cooling accessories, cold storage insulation materials, mechanical tools sealing buffers, heat setting parts, all kinds of fine instruments, cutting tools, measuring tools packaging lining, sporting goods, intellectual building blocks and so on.
